News

Global Dry Powder Peel-off End Market Overview:The global dry powder peel-off end market was valued at USD 1.92 billion in 2022 and is expected to reach USD 3.14 billion by 2028, growing at a CAGR of 4.7% from 2022 to 2028. The Dry Powder Peel-off End market is a dynamic and multifaceted landscape that encompasses various products, services, and industries. It is characterized by intense competition, rapid innovation, changing consumer behavior, and evolving market trends. Businesses operating in the Dry Powder Peel-off End market need to have a deep understanding of the market dynamics, including its size, growth rate, customer preferences, competitive landscape, and regulatory environment. Market research reports providing a comprehensive overview of the Dry Powder Peel-off End market, offering insights into various aspects of the market. These reports use a combination of qualitative and quantitative research methods to analyze market trends, customer behavior, and competitor strategies. They also provide valuable information on market segmentation, market positioning, and market share analysis of key players.

Introduction On January 18, 2022, domestic producers filed petitions with the U.S. Department of Commerce (DOC) and the U.S. International Trade Commission (ITC), seeking antidumping (AD) duties on imports of certain tin mill products from Canada, China, Germany, Netherlands, South Korea, Taiwan, Turkey, and the United Kingdom, and countervailing (CVD) duties on such imports from China. There is currently an AD order on the same products imported from Japan, which has been effect for over 20 years. Imports of the covered merchandise into the United States from the identified countries amounted to approximately $1.4 billion in calendar year 2021, a value that grew to $1.9 billion during the period January through September 2022. As such, the value of trade covered by these petitions could make this one of the largest combined AD/CVD investigations initiated in the last several years. The petitioners include Cleveland-Cliffs Inc. and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union (USW). According to the petitions, Cleveland-Cliffs is a West Virginia-based domestic producer of tin mill products, and USW represents workers at all major facilities where tin mill products are made. The petitions identify two other domestic producers of tin mill products-U.S. Steel Corporation and Ohio Coatings Company-neither of which have expressed a public position on the petition. Under U.S. law, a domestic industry (including workers in said industry) can petition the government to initiate an AD investigation into the pricing of an imported product to determine whether it is sold in the United States at less than fair value (i.e., [dumped"). A domestic industry can also petition for the initiation of an investigation of alleged countervailable subsidies provided by a foreign government to producers of the covered merchandise. DOC will impose AD or CVD duties on a product if it determines that imported goods are dumped and/or subsidized, and if the ITC also determines that the domestic industry is materially injured or threatened with such injury by reason of imports of that product. If the ITC and DOC make preliminary affirmative determinations, U.S. importers will be required to post cash deposits in the amount of the AD and/or CVD duties for all entries of subject merchandise entered on or after the date of publication of DOC`s preliminary determination. The preliminary AD/CVD rates can change in the final DOC determination, following further factual investigation, verification, and briefing. Scope Petitioners have requested the following scope of the investigations, which mirrors the scope language for the current order on Certain Tin Mill Products from Japan: The products within the scope of these investigations are tin mill flat-rolled products that are coated or plated with tin, chromium, or chromium oxides. Flat-rolled steel products coated with tin are known as tinplate. Flat-rolled steel products coated with chromium or chromium oxides are known as tin-free steel or electrolytic chromium-coated steel. The scope includes all the noted tin mill products regardless of thickness, width, form (in coils or cut sheets), coating type (electrolytic or otherwise), edge (trimmed, untrimmed or further processed, such as scroll cut), coating thickness, surface finish, temper, coating metal (tin, chromium, chromium oxide), reduction (single- or double-reduced), and whether or not coated with a plastic material. All products that meet the written physical description are within the scope of the investigations unless specifically excluded . . . . The merchandise subject to these investigations is currently classified in the Harmonized Tariff Schedule of the United States (HTSUS), under HTSUS subheadings 7210.11.0000, 7210.12.0000, 7210.50.0000, 7212.50.0020, 7212.50.0090, 7212.10.0000, and 7212.50.0000 if of non-alloy steel and under HTSUS subheadings 7225.99.0090, and 7226.99.0180 if of alloy steel. Although the subheadings are provided for convenience and customs purposes, the written description of the scope of the investigations is dispositive. The scope also includes detailed descriptions of a number of products that either fall outside of or are expressly excluded from the scope of the investigations. Foreign Producers and Exporters of Subject Merchandise A list of foreign producers and exporters of tin mill products, as identified in the petitions, is provided in Attachment 1. U.S. Importers of Subject Merchandise A list of U.S. importers of tin mill products, as identified in the petitions, is provided in Attachment 2. Alleged Margins of Dumping/Subsidization Petitioners alleged the following dumping margins for products from the identified countries: Canada: 78.29% China: 130.88% Germany: 43.64% Netherlands: 124.17% – 294.27% (range) South Korea: 13.46% – 110.84% (range) Taiwan: 47.22% – 60.12% (range) Turkey: 96.51% – 106.43% (range) United Kingdom: 110.81% DOC generally assigns duties at these alleged dumping rates to exporters that fail to cooperate with the investigation. No specific subsidy rates for China are included in the petition. Potential Trade Impact According to official U.S. import statistics, a total of 1.3 million short tons of subject merchandise were imported into the United States in 2021, with Germany and the Netherlands representing the two largest shares of subject merchandise by quantity. Imports from all of the identified countries made up nearly 90 percent of all tin mill steel products imported into the United States in 2021. In 2021, the value of the subject merchandise imported from the seven countries was approximately $1.4 billion. As noted above, this value increased to nearly $1.9 billion in the partial year period of January through September 2022. Given these significant quantities and values, the petitions have a larger potential trade impact than many AD/CVD petitions filed in recent years. Estimated Schedule of Investigations 1/18/2023 Petition filed. 3/4/2023 ITC preliminary injury determination. 6/17/2023 DOC preliminary CVD determination, if fully postponed. 8/16/2023 DOC preliminary AD determinations, if fully postponed. 1/5/2024 DOC final AD and CVD determinations, if both preliminary and final determinations are fully postponed. 2/26/2024 ITC final injury determination, if DOC`s determinations are fully postponed. 3/4/2024 AD/CVD orders published.

Lamination technology emerges in China market several years ago. And with its advantage on cost, good mechanical and chemical performance, special and unique laser effect, it wins more and more market share during competition with traditional printing&lacquering. Currently, there are 2 kinds of lamiantion technology: lamiantion with glue, and hot-melting lamination. Lamiantion with glue is more mature, and there are more than 200 glue lamination lines spread over china market. This kind of lamiantion mianly used on steel to making paint can, chemical can. The PET film can be laminated onto surface of black plate directly for making can ends (no requirement of welding line), and it obviously saves cost for lids factories. And the lamiantion has very food rusty-resistance, good anti-scratches performance. The glue lamiantion PET film can also have 3D laser effect, which is very special and unique, and can't be realized with traditional printing. The 3D laser effect has very good anti-fake functions, also brings added value for brands with its sepcial and attractive apperance. The other kind of lamiantion is hot-melting, this technolgoy comes from Japan. It is mainly used for food cans. In china, the supply for hot-melting lamiantion is still limited, not as many as lamination with GLUE. In our factory, we offer both lamination with glue and hot-melting lamiantion. If any interest, welcome contact us for more details.

Cannex & Fillex – the World Canmaking Congress, is an international showcase of the latest canmaking and filling technologies from around the world. It is the perfect place to review the latest metal packaging equipment, materials and services and to make or re-establish valuable business contacts. Cannex&Fillex,.. Whether you are a canmaker, filler or a supplier to these industries, Cannex & Fillex continues to be a focal point to help you develop your business, exchange information, discuss new technologies and meet the people that you need to see in one place at one time. .,Cannex & Fillex..,. Cannex & Fillex Asia Pacific will return to Guangzhou, China (dates to be announced) and will be held at the Pazhou Complex. Time and again, Cannex & Fillex has proved itself as a metal packaging and filling platform, offering unparalleled doorways to the Asian market and to the world. 202267-10[Cannex & Fillex",. Cannex & Fillex,.

French vegetable canner Bonduelle is first to launch a processed product in 150g cans using peelable foil easy-open lids made by canmaking firm Impress. The Easy Peel convenience ends are being used on sweetcorn cans under the `Crispy Gourmet Majs` brand for the Scandanavian market. The move was made to meet a growing demand for convenient and time-saving packaging, said Impress.

Consumers prefer peel-off ends (POEs) to easy-open ends (EOEs) on canned foods because they perceive them to be safer and easier open, according to a survey from Amcor, which supplies POE technology.

8/15/2023 - 8/17/2023 Hilton Panamá, Panamá City, Panamá Who Attends The 2023 Latin American Conference will engage senior leadership from life insurance companies and banks doing business throughout Latin America. They join to learn and network with each other as well as various subject matter experts, government officials and leading academics that speak on the latest developments in distribution, training and corporate management. Highlights Join us in Panama, where we will bring together leaders from the Latin American life insurance industry. You will benefit from: New perspectives: Gain fresh insights from both peers and speakers on the top of mind issues that keep executives up at night. Networking and camaraderie: Share experiences and ideas with senior leaders worldwide. Knowledge and insight: Learn about the latest trends and issues affecting the industry in Latin America, including: A Global Industry Outlook: Economic and geopolitical risks Engaging a New Generation of Leadership Talent The Voice of Insurance Producers in Latin America – Expectations for an Optimal Experience The Impact of AI on the Insurance Industry A New Look at Underwriting Advancements in Bancassurance CEO Panel: Forces of Change Reconnecting with Consumer Needs Retirement Programs Seguros Inclusivos and how to reach low-income consumers InsurTech Innovations: New products and modern distribution strategies Please continue to check back for additional details and updates!

This year`s Summit will take place in Edinburgh, Scotland, 11-12 October, preceded by an evening networking reception on Tuesday 10 October. Bringing together delegates and speakers from around the world, the Summit will include The Canmaker magazine Cans of the Year Awards. Delegate registration includes a seat at the Cans of the Year Awards gala dinner on 11 October, giving everyone a chance to celebrate the world`s finest metal packaging. Join us in Edinburgh in October and experience two days of intensive, lively, stimulating and constructive dialogue to help you boost your portfolio of knowledge and ideas.

METPACK 2023 OPENS FROM 2 TO 6 MAY The next world's leading trade fair for metal packaging, METPACK, will be held at Messe Essen from May 2 to 6, 2023. After the past run was first postponed due to the effects of the Corona pandemic and then had to be cancelled, the global industry highlight is now reopening in the usual three-year cycle and parallel to interpack (May 4 to 10, 2023). In addition to packaging, the range of products presented by the more than 300 exhibitors at METPACK recently includes machinery and equipment for the production of cans, lids and bases, as well as filling and sealing systems. Interested exhibitors will soon find the application documents at www.metpack.de. "We are confident that METPACK 2023 can take place with its usual size and internationality. On the part of the exhibitors, we have recently experienced a lot of understanding and encouragement. The message was clear: The industry needs METPACK and would rather come back to Essen today than tomorrow. Due to the interpack taking place in Düsseldorf at the same time, we are again expecting considerable synergies with the visitors," says Oliver P. Kuhrt, Managing Director of Messe Essen. METPACK is the world's most important meeting place for the metal packaging industry. The trade fair visitors are for the most part decision-makers from the global food and chemical industry.